Removal and installation of the top facing of a door of a luggage compartment
Detach trim -1- in the middle (trim tabs must pop out of tailgate slots). Detach trim from side trim -2- and -3-.
Installation
Instructions: Before installation, check the integrity of the fastening brackets. Replace damaged staples.
Clip trim -1- into side trim -2- and -3-. Orient trim -1- so that all guides -2- and clips -3- are opposite the corresponding holes in the tailgate. Press the trim -1- in the area of the guides and clips until they engage in the corresponding holes in the tailgate.
Removal and installation of lateral facing of a door of a luggage compartment
Instructions: The work on removing and installing the left side of the car is described below. Removal and installation work on the right side of the car is carried out in the same way.
Remove upper tailgate trim. Unclip upper end of trim -1- in area of clip -2- and guide -3- with a jerk so that they disengage from slots in rear lid. Pull trim out of mounting holes in tailgate trim -4-, -arrow A- and -arrow B-.
Removal and installation of an upholstery of a door of a luggage compartment
Remove upper tailgate trim. Remove the tailgate side trims. Remove caps -1- in both handle recesses. Unscrew the screw -1- in both recesses of the handles (1.5 Nm).
Grasp one of these handles and pull the trim -1- off the tailgate with a jerk.
Visitor comments