Raise the vehicle until the front wheels are completely unloaded.
Run the engine briefly (maximum 2 seconds).
Caution! The pump must not suck in air, and the steering wheel must not be turned under any circumstances.
The pause time between individual engine starts is approximately 30 seconds.
- Check the hydraulic oil level and top up if necessary.
- Repeat this process until the oil level becomes constant.
- With the engine stopped, turn the steering wheel 10 times from lock to lock.
- Check the hydraulic oil level and top up if necessary.
- Start the engine.
- Turn the steering wheel 10 times from lock to lock.
- Check the hydraulic oil level and top up if necessary.
The remaining air in the steering system will come out on its own while the car is moving after 10-20 km.

Visitor comments