Contents: Removal ↓ Installation ↓
Removal
To unscrew the front hex nuts 4 of the roof rail, you must first remove the mounting frame 4 for the handles.
Fig. 8.17. Removing the roof rail mounting frame
Unscrew screws 2 and remove mounting frame 1 (Fig. 8.17).
After this, access is provided to the hex nuts 4 of the railing mount.
Unscrew nuts 2 from the threaded pins of the roof rail 1.
Fig. 8.18. Removing the roof rail
Remove the railing 1 with the pins upwards from the mounting brackets 3, and then from the roof (Fig. 8.18).
Installation
Fig. 8.19. Installing the railing
All mounting brackets 4 must be installed.
Place the roof rail 1 on the roof 2. In this case, you should start with the front threaded pin 5.
Tighten nuts 3, tightening torque: 23 Nm.
Visitor comments