Removing
Pic. 8.16. Removing a license plate
Remove the clips 2 and remove the license plate holder 1 from the grille 3 (pic. 8.16).
Installation
Place the license plate holder 1 on the radiator grille 3 and press in the clips 2.
Note: On vehicles with front parking aid, a distance a of 12 mm must be observed when drilling the holes.
The wiring harness for the parking aid 3 is routed at the height of the upper holes on the bumper beam 5.
Align license plate holder 1 with grille 3.
Set the depth limit on the drill to – a=12 mm and drill holes.
Place the license plate holder 1 on the radiator grille 3 and press in the clips 2.
Visitor comments