Lower mudguard of the engine compartment (all engines)
- 1 - self-tapping screw (3 pcs.),
- 2 - front part of the mudguard,
- 3 - self-tapping screw (3 pcs.),
- 4 - rear of the mudguard,
- 5 - self-tapping screws (5 pieces.),
- 6 - cladding fastening,
- 7 - screw (2 pcs.),
- 8 - bracket with nut (2 pcs.),
- 9 - bracket with nut (3 pcs.),
- 10 - pin (4 things.),
- 11 - casing,
- 12 - damper,
- 13 - bracket
Removing
1. Raise the front of the car and secure it on stands.
2. Remove the self-tapping screws that secure the lower engine mudguard.
3. Rotate 180°and remove locking pins.
4. Remove the front and, if equipped, the rear of the engine mudguard.
Installation
1. Install the engine mudguard and secure it with self-tapping screws, tightening them to a torque of 20 Nm.
2. Insert the locking pins and turn them 180°.
3. Lower the car.
Visitor comments