Details of the purifier are shown in Figure 8-24. Disconnect the wire from the negative battery terminal. Remove brush arms. Unscrew the bolts of the axes of the levers of the brushes (pic. 8-25). Loosen the motor mounting bolt. Disconnect plug. Remove the wiper mechanism assembly. Disconnect the motor from the mechanism. If it is necessary to remove the driver, make a mark of its position relative to the motor shaft before removing it. Windshield wiper installation is carried out in sequence. reverse withdrawal. After installation, make sure that the wiper blades are in the lower position at the windshield seal during operation of the wiper.
Pic. 8-24. Windshield Wiper Details:
1 - working edge of the brush;
2 - brush;
3 - brush lever;
4 - drive rods;
5 - leash;
6 - electric motor;
7 — a frame of fastening of a screen wiper.
Visitor comments