Fig. 8-26. Rear window wiper parts:
1 - working edge of the brush;
2 - brush;
3 - brush lever;
4 — gear motor;
5 — mounting frame;
6 — windshield washer tube.
Disconnect the rear window washer pipe.
Loosen the fastening nut and remove the wiper arm. Loosen the wiper arm axle nut. Remove the windshield wiper mechanism trim in the rear door by unscrewing the two fastening screws in its upper part and disconnecting the latches in the lower part. Loosen the two fastening bolts of the gearmotor bracket. Disconnect the plug connector. Remove the gearmotor, remove the washers.
[The information is available on the website VWManual]
Install the rear window wiper in the reverse order of removal. Set the wiper arm so that the wiper is 20 mm from the rear window seal.
Visitor comments