Remove the bumper grille by turning it downwards. Remove the left and right spacer bushings. On vehicles with fog lights, disconnect the headlight connectors. Working under the vehicle, unscrew the bolts securing the bumper to the lower crossmember on both sides of the vehicle (Fig. 9-10).
Remove the bumper by moving it parallel to the side guides (Fig. 9-11). On vehicles with headlight washers, disconnect the washer tube from the branch pipe located between the mudguard and the washer nozzle.
Fig. 9-11. Front bumper parts:
1 - bumper;
2 - spoiler;
3 - bumper grille;
4 — headlight washer;
5 - bumper beam;
6 - side guide;
7 — spacer sleeve;
8 — bracket;
9 - overlay.
When installing, place spacers on both sides of the bumper. Install the bumper in place.
Tighten and tighten the bumper mounting bolts. On vehicles with fog lights, connect the headlight connectors. Connect the headlight washer tube. Install the air intake grille, making sure the mounting pins are correctly inserted into the sockets. Tighten the three grille mounting screws. During a test drive on an uneven road surface, make sure that the bumper does not vibrate.
Visitor comments