- easy access to all controls
- relaxed and unfatiguing posture of the driver
- maximum efficiency of seat belts and airbags.
Attention: The front seats must not be too close to the steering wheel and dashboard. Feet while driving should be down on the platform provided for this - and in no case on the dashboard or seats.
1 - Longitudinal seat adjustment
Raise the lever and move the seat. Then release the lever and push the seat until the latch engages.
The driver's seat must be installed in such a way that with the pedals fully depressed, the legs are slightly bent at the knees.
Caution: For safety reasons, do not change the driver's seat while the vehicle is moving.
2 - Seat back adjustment
Unload the seat back and tighten the adjustment knob.
The seatback must be adjusted in such a way that the top of the steering wheel can be easily reached without tension with slightly bent arms.
Attention: While driving, the backrest must not be leaned back too far, as this may weaken the seat belts.
3 - Seat tilt adjustment
If you need to change the inclination of the seat, pull the lever up and set the desired inclination of the seat by adjusting it with more or less weight on the backrest.
4 - Seat height adjustment
Unload the seat and pull the lever up - this will move the entire seat evenly up. If the seat needs to be lowered, press down on it with your weight.
Caution: For safety reasons, the height of the driver's seat should not be adjusted while the vehicle is in motion. Be careful when adjusting the height, as careless operation may result in injury.
Power seat adjustment
To adjust, press the switch on the outside of the seat.
Attention: Be careful when setting the height, as inattention may cause injury.
5 - Adjusting the curve of the backrest of the anatomical seat
By turning the handwheel, you can change the curve of the seatback. If the backrest repeats the shape of the natural curve of the spine, it makes even long sitting untiring.
Visitor comments