Contents: Removal ↓ Installation ↓
Removal
Remove the upper trim of the B-pillar, see the relevant chapter above.
Unscrew bolt "6" and remove guide eye "4". 1 - height adjustment lever for belt, 5 - seat belt.
Unscrew two bolts "3", remove the adjustment mechanism "2" from the B pillar and remove.
Installation
Installation is performed in the reverse order. In this case, tighten bolts "3" to a torque of 23 Nm, and tighten bolt "6" to a torque of 40 Nm.
Check the operation of the front seat belt height adjustment mechanism.
Visitor comments