Contents: Removal ↓ Installation ↓
Removal
Fold the rear seat back forward.
Remove the trunk lid support, see the relevant chapter above.
Unscrew bolt "4", remove belt eyelet "3" and pull it out through the slot in the luggage compartment lid support.
Unscrew bolt -1- and remove the automatic seat belt retractor "2" from the side.
Fold the rear seat cushion forward.
Unscrew the bolt and remove the double lock from the bottom of the body.
Unscrew the bolt and remove the lock with the eye for the middle seat belt from the bottom of the body.
Remove the back of the rear seat, see the relevant chapter above.
Remove the cover from the back of the rear seat.
Unscrew the "arrow" bolts and remove the base guide "1".
Unscrew nut "2" and remove the central automatic retractor -3- of the seat belt from the backrest.
Installation
Installation is carried out in reverse order.
The original text is available on the website [vwmanual]
Tightening torques:
- Double lock mounting bolts 40 Nm
- Belt eye mounting bolts 40 Nm
- Automatic retractor mounting bolt/nut 40 Nm
- Base guide mounting bolts 23 Nm.
Visitor comments