4. Move the gear lever to the position «S».
5. Disconnect the cable 1 from the lever 3 of the box by prying the cable with a wrench 2 (see illustration).
6. Squeeze the retainer leashes (see arrows in illustration 2.5) and release the cable from the bracket.
7. Jack up the vehicle, put it on jack stands and remove the heat shield. If necessary, remove parts of the exhaust system to do this.
8. Remove the housing 7 of the gear lever (see illustration 2.3).
9. Press the pin with a screwdriver, acting from under the car, remove the retaining ring and disconnect the gearshift cable (see illustration).
Visitor comments