In the engine compartment, disconnect the clutch rod. To do this, have an assistant pull the release lever up.
At the thick end of the cable traction, remove the fixing bracket towards the left (if you look in the direction of movement).
Clutch drive for Golf and Jetta models: 1 - pedal stand; 2 - clutch rod; 3 - clutch pedal, which is located in the locking support.
Remove the retaining plate and the anti-twist lock.
The original can be seen on the portal www.VWMANUAL.ru
Remove the clutch rod from the rubber guide of the gearbox support.
Unhook the cable tie eye near the pedal.
Push the rubber bushing into the body partition; pull the rod out towards the engine compartment.
When installing, first hang the clutch cable near the pedal.
Lubricate the clutch rod near the hinges with light MoS2 paste.
Press the clutch pedal several times. Adjust the free travel of the pedal.
Visitor comments