Repair of brake caliper FN 3 (VW Tiguan 1)

When carrying out repair work, install all parts from the repair kit. Use only alcohol to clean the brakes. Apply a thin layer of mounting paste G 052150 A2 to the walls of the brake cylinder holes, pistons and seals.

• 1 - Protective cap, put on the bleed nipple
• 2 - Bleed nipple, 10 Nm, lightly lubricate the thread with mounting paste G 052150 A2 before tightening
• 3 - Caps, inserted into the support sleeve
• 4 - Guide, 30 Nm
• 5 - Support sleeve, insert into brake caliper
• 6 - Brake caliper
• 7 - Bracket, the brake caliper is screwed to it
• 8 - Spring, inserted with both ends into the holes of the brake caliper
• 9 - Sealing ring
• 10 - Piston, first apply a little assembly paste G 052150 A2 to the piston
• 11 - Sealing cuff, do not damage when installing the piston

The original text is available on the portal VWManual.ru