After each deployment of the front passenger airbag and/or the front passenger belt pretensioner, the basic setting of the seat occupied detection control unit -J706- must be carried out. Basic installation should be carried out using a tester that has a mode "Guided Troubleshooting". When replacing the sled and/or the base of the seat cushion due to their deformation in an accident, it is also necessary to replace the seat occupancy detection system using "Seat occupancy detection repair kit". Then carry out the basic setting of the seat occupied detection control unit -J706-. Basic installation should be carried out using a tester that has a mode "Guided Troubleshooting".
Visitor comments