Removing and installing driver front airbag crash sensor -G283- (vehicle only for US and Canadian markets)
Note: The driver's front airbag crash sensor -G283- is installed in the engine compartment above the left side member.
Remove the negative terminal from the battery. Unlock connector and disconnect connector -1- from driver's front airbag crash sensor -G283- -3-. Remove screw -2- (6 Nm).
Crash sensor for front passenger airbag -G284- (only a / and for the markets of the USA and Canada)
Note: The front passenger airbag crash sensor -0284- is installed in the engine compartment above the right side member.
Remove the negative terminal from the battery. Removing and installing front passenger airbag crash sensor -G284- is carried out in the same way as removing and installing driver front airbag crash sensor -G283-.
Removing and installing crash sensor for driver's side airbag -G179-
Note: The driver's side airbag crash sensor -G179- is installed on the front door carrier.
Remove the negative terminal from the battery. Remove the driver's door trim. Remove the front door carrier panel. Drill out blind rivet Drill out blind rivet -2-. Unlock connector and disconnect connector -4- from crash sensor for driver's side airbag -G179- -3-.
Installation
Connect connector -4- to driver's side airbag crash sensor -G179- -3-. Attach crash sensor for driver's side airbag -G179- to door carrier with countersunk rivet -2-. Use the rivet tool -VAS 5072- to install the rivet. Secure crash sensor for driver's side airbag -G179- to door carrier with countersunk rivet -1- as described above. Further installation is carried out in the reverse order. Turn on the ignition. Connect the negative terminal to the battery.
Removing and installing front passenger side airbag crash sensor -G180-
Note: The front passenger's side airbag crash sensor -G180- is installed on the front door carrier.
Remove the negative terminal from the battery. Remove the front passenger door trim. Remove the front door carrier panel. Removing and installing front passenger side airbag crash sensor G18Q- is carried out in the same way as removing and installing driver side airbag crash sensor -G179-.
Removing and installing driver side rear side airbag crash sensor -G256-
Note: Driver's side rear side airbag impact sensor -G256- is installed in front of the rear wheel arch on the driver's side.
Remove the negative terminal from the battery. Move the left rear seat as far forward as possible. Remove rear wheel arch trim. Unlock connector lock and disconnect connector -1- from crash sensor -3-. Remove screw -2- (6 Nm).
Removing and installing crash sensor for rear side airbag, front passenger side -G257-
Note: The front passenger side rear airbag crash sensor -G257- is installed in front of the rear wheel arch on the front passenger side.
Removing and installing rear side airbag crash sensor, front passenger side -G257- is carried out in the same way as removing and installing rear side airbag crash sensor, driver side -G256-.
Visitor comments