Instructions: When adjusting the tailgate, the vehicle must be on a level surface. The tailgate lock -3- is bolted directly to the tailgate itself -1-. It does not have slotted holes and is therefore not adjustable. Stops -2- on the left and right are intended for adjustment. They serve to fix the position of the tailgate -1- and to dampen vibrations. The tailgate is adjusted correctly if it smoothly transitions: into other body panels, is not recessed inwards and does not protrude outwards and has a uniform gap around the entire perimeter. Fixing the door with the bracket -5- must be done without any significant effort.
By loosening the bolts -4- it is possible to adjust the position of the rear door -1- using the enlarged holes in the hinge -3-. Adjustment is possible -in the direction of the arrows -a and b-. In addition, by loosening the nuts -2-, it is possible to adjust the position of the hinge -3- within a limited range. After adjustment, it is necessary to carry out anti-corrosion treatment of hinges and bolts. Adjust tailgate -1- with locking clip. Adjust the position of the stops -2- located on the left and right.
Visitor comments