- 1 - Gas stop
- 2 - Bracket with ball pin
- 3 - Bolts, 2 pcs. per bracket, 10 Nm
- 4 - Ball pin, 20 Nm
Removal and installation of the gas stop
Open the tailgate and support it. Insert a small screwdriver under the spring clip -2-. Push clip -2- until stud arrow- can be released. Detach gas stop -1- from ball pins -3- and -4-. After removing the gas stop -1- slide the spring clips -2- back into place.
Caution: Care must be taken when installing a used gas stop. The spring clips must not be fully pushed out of the recesses to avoid damage. As a result, the gas stop may jump out of the mountings, which is fraught with injury or damage to the body.
Visitor comments