Contents: Removal ↓ Removal the left support bracket ↓ Removal the right support bracket ↓ Installation ↓ Tightening torques ↓
Removal
To remove the body level sensor, it is necessary to dismantle the shock absorber strut and support bracket.
Remove the shock absorber strut.
Removal the left support bracket
Unscrew the bolt under the brake fluid reservoir 1 (Fig. 4.70).
Unscrew the bolts under the hydraulic oil reservoir 1 (Fig. 4.71).
Removal the right support bracket
Unlock and remove the engine control unit plug 2.
Remove the control unit (Fig. 4.72).
Remove the engine control unit mount 2.
Now there is access to the support bracket bolts (3 pcs.).
Unscrew the bolt (Fig. 4.73).
Remove the support bracket.
Remove the body level sensor from the upper wishbone and unscrew it from the support bracket.
Installation
Installation is carried out in the reverse order, taking into account the following.
The protrusion of the body level sensor mount must be adjacent to the support bracket (Fig. 4.74).
Install the support bracket.
Install the shock absorber strut.
Tightening torques
| Component | Tightening torque, Nm |
| Support bracket to the body (Use new bolts) | 50 + 90° |
| Upper wishbone to support bracket (Use a new bolt and nut) | 50 + 90° |
Visitor comments