The strut front suspension uses two shock absorbers, two wishbones and a stabilizer bar.
The shock absorber strut consists of a shock absorber, a coil spring with a variable coiling pitch and a steering knuckle.
The stabilizer is fixed in front on the frame cross member in rubber-metal bushings and is connected to the transverse lever. The stabilizer reduces lateral forces when changing direction and prevents body tilt. The wishbone and stabilizer bar hold the shock absorbers in the down position. Above the wheel, the racks are attached to the body.
To adjust the camber of the front wheels on the frame, an eccentric installation of the transverse lever is made.
The wheel suspension consists of a steering knuckle on a shock absorber strut and a wheel hub.
Front strut suspension does not require maintenance.
Front strut suspension: 1 - shock absorber; 2 - transverse lever; 3 - stabilizer; 4 - steering mechanism; 5 - transverse steering rods; 6 - lever; 7 - steering shaft; 8 - frame cross member
Visitor comments