Loosen the nut securing the upper end of the shock absorber while holding the shock absorber rod with a hex socket wrench.
Slowly raise the rear of the car and remove the wheel.
Loosen the nut on the lower end of the shock absorber.
Remove the shock absorber from the suspension arm seat support.
Remove shock absorber with spring.
Warning. It is forbidden to simultaneously remove both shock absorbers of the rear suspension with springs, as this will lead to excessive loads on the rubber-metal support installed in the rear suspension beam.
The installation of the shock absorber with the spring is carried out in the reverse order of removal, observing the tightening torques of the threaded connections.
Visitor comments