Installing the Inner Pivot Belleville Spring
When installing a belleville spring (1) inner hinge larger diameter should be directed outward.
Installing the Outer Pivot Belleville Spring
Belleville spring (1) of the outer hinge must point with the larger diameter outward, and the thrust ring (2) smaller diameter should be directed outward.
Order of execution
1. To lubricate the hinges, use G000603 grease. Half of the grease must be put into the protective cover, and the other half into the hinge.
2. Tool 1847 must be used to fasten the clamps. Place the jaws of the tool on the corners of the clamp clamp and in this position tighten the jaws with the screw (A - screw for tightening the jaws of the tool, B - installation of the jaws of the tool on the clamp).
Visitor comments