Location of fuses on the main fuse box
Location of the fuel pump relay on the relay box under the instrument panel on the driver's side
The fuel pump relay is located in the relay box under the instrument cluster on the driver's side.
Order of execution
1. Remove the #28 fuel pump fuse from the fuse box.
2. Connect an LED probe between ground and one of the fuse pins.
3. Remove the top trim in the driver's footwell.
4. Turn on the starter. At the same time, the fuel pump relay should turn on with a click. In addition, the LED probe should be lit.
5. If the relay does not turn on, check the relay circuit.
6. If the LED probe is off but the relay is energized, connect the LED probe to the other fuse post.
7. If the tester LED is still not lit, connect an additional wire between terminal 23 of the fuel pump relay and the fuse terminal.
8. If the fuel pump starts to work, then the relay is faulty and needs to be replaced.
Visitor comments