Contents: Removal ↓ Installation ↓
Fuel filter on models with petrol engines
- 1 - fuel filter;
- 2 - fuel hose;
- 3 - fuel hose;
- 4 - holder;
- 5 - bolt;
- 6 - arrow on the fuel filter housing indicating the direction of fuel flow;
- 7 - to the engine fuel line
Removal
1. The fuel filter is mounted on the bottom of the vehicle in front of the fuel tank.
2. Raise the rear of the vehicle and secure it on stands. Place a suitable container under the fuel filter.
3. Loosen the clamps securing the fuel hoses to the fuel filter.
4. Cover the hose connection with a rag and remove the fuel hose from the fuel filter.
5. Unscrew the fuel filter holder mounting bolt.
6. Remove the fuel filter from the holder.
Installation
1. Install the new fuel filter so that the arrow on the filter housing aligns with the direction of fuel flow through the fuel filter.
2. Screw on the fuel filter holder.
3. Connect the fuel hoses to the fuel filter and secure them with clamps.
4. Start the engine and check the fuel system for leaks.
Warning: On 2.3-I models with automatic transmission, the accelerator cable controls the throttle valve and the switch located on the firewall.
Visitor comments