We recommend that one of the two radio remote control keys supplied with your new vehicle be matched to the left memory key and the other key to the middle key.
If you wish, you can order another remote control key from your Volkswagen service center and then match it with the right memory key.
Once you have memorised the seat and outside mirror settings, you have 10 seconds to match the key to the appropriate memory button.
Matching the remote control key with the memory keys
1. Remove the remote control key to be matched from the ignition switch.
2. Press the key release button and hold it down for about one second until a beep sounds indicating that the matching process has been successfully completed. The required data is now entered into the memory device under the selected memory key.
Warning: If the remote control key was previously paired with another memory key, all previous pairing data will be erased.
Warning: If a key is matched with a memory key that was previously matched with another key, all previous matching data is erased.
Warning: The key assignment to the memory button remains valid even if new seat and exterior mirror adjustments have been made under this memory button.
[The original article is posted on the website: vwmanual.ru]
Warning: When the battery is disconnected from the vehicle electrical system, all data on key matching with the memory keys is erased.
Visitor comments