- D memory keys;
- E lock switch
You have the ability to change the previously adjusted position of the right mirror for reversing and enter new adjustments made in accordance with your requirements into a memory device.
Order of execution
1. Switch the setting of the exterior mirrors to the right mirror.
2. Engage reverse gear.
3. Install the right mirror.
4. Press the memory button D, under which the seat and exterior mirror adjustments are stored in the memory device when driving forward, and keep the button pressed for about three seconds, until an audible signal certifies the successful completion of the memorization process. This adjustment is now memorized under the selected memory key.
As soon as you engage reverse gear, the right mirror will move to the preset position. This process will be interrupted when you manually begin to set this mirror to a new desired position for you.
As soon as you disengage reverse gear, the right mirror will move back to the memorized position when driving forward.
Each time you save the seat and exterior mirror settings for forward travel, you must also re-memorize the individual right mirror setting for reverse travel.
Visitor comments