Calling up seat and mirror adjustments for forward movement (VW Golf 4)

The settings stored in memory can be recalled either by pressing the memory buttons D or via the remote radio control of the locks.

Call via memory keys

For safety reasons, adjustments can only be called up when the ignition is switched off.

There are two call options:

• touch-automatic: lightly press the selected memory button D with the driver's door open. The seat and outside mirrors will automatically take the stored position;
• manual: keep the selected memory button D pressed with the driver's door open or closed until the seat and outside mirrors are finally in the memorized position.

If you press one of the memory buttons again during the automatic adjustment of the seat and exterior mirrors, the current recall process will be interrupted. If you then press the memory button again, the interrupted adjustment process will be continued. If, on the contrary, you press one of the other two buttons, the recall process of the settings entered into the memory on this button will be carried out.

Call via remote radio control of locks

You can set the settings stored in the memory only with the ignition off and the driver's door closed.

Briefly press the radio remote control key release button and then open the driver's door. The seat and outside mirrors will automatically return to the previously selected position.