The following details are required:
- 1 button switch;
- 1 crocodile (large enough to connect the battery pole);
- 1 portable fuse: body and 8 A fuse;
- 1 suitable flat plug that can be inserted into the fuse box in the fuse box, on the side of the instrument panel;
- 1 two-core wire with a cross section of 1.5 mm2 and about 5 m long.
Attention! Before connecting the remote control, check fuse 18 in the fuse box.
Installation
1. Remove the fuel pump relay from the relay board (relay location #12).
2. Connect the remote control with a flat plug to pin 4 of relay location no. 12.
3. Connect the crocodile remote control to the positive pole (+) battery.
Visitor comments