If necessary, the brake discs can be further sanded so that they can be used again. In this case, it is necessary to take into account the parameters indicated in the table of dimensions and adjustment parameters, where the minimum values of the thickness are given. The thickness of the brake disc is not the same for different models, that is, the models described in this manual are equipped with thicker brake discs, as they are blown through with air. Pay attention also to the flatness of the surface of the brake discs, as they must be ground in such a way that both sides are parallel to each other.
If there is a suspicion that the brake disc is damaged, then using a dial indicator, you can check the runout of the outer edge of the disc when assembled.
Visitor comments