By turning the cover, the activation time of the automatic engine start system can be changed. In this case, in no case should you deviate from the basic adjustment.
Remove air filter. Loosen the 3 cover screws, turn the cover. At the same time, observe the air damper of the upper part of the carburetor. If you want to increase the time the air damper is in the closed position, turn the cover so that the air damper moves in the direction "zu" (maximum 5 mm from the mark).
In conclusion, check the automatic engine start system. After warming up, the air damper should be open (be in an upright position).
If the automatic engine start system should turn off earlier, turn the cover in the opposite direction (maximum 5 mm from the mark).
Visitor comments