Installing wiper arms
Install driver side and passenger side leashes on their shafts.
Slightly tighten the fixing nut on the drive shaft on the driver's side.
Place washer 1 on wiper arm shaft.
Insert cone 3 into wiper arm 2 (rice. 7.80).
Slightly tighten the fixing nut 2 on the driver shaft on the passenger side (rice. 7.79).
NOTE: The wiper arm shaft retaining nut should only be fully tightened after adjusting the wiper blade home position.
Tighten the passenger side wiper arm pivot nut.
Tighten the fixing nut 1 of the wiper arm axle on the passenger side to the specified tightening torque (rice. 7.79).
Adjust the initial position of the wiper blades.
Visitor comments