CAUTION: Risk of scalding from hot steam and hot coolant. When the engine is hot, the liquid in the cooling system is under excess pressure.
Drain the coolant. Remove the auxiliary unit bracket. Unscrew bolts -4 and 5- and remove the oil cooler -3 with gasket "2".
Installation is carried out in the reverse order, and the following must be observed.
Instructions: Replace gaskets and sealing rings. All hose connections must be secured with clamps that match those installed at the factory.
Install oil cooler-3- with new gasket "2".
[The original article is available at VWMANUAL.ru]
Visitor comments