- 1 - Eccentric bolt, after loosening, adjust the wheel alignment, do not turn the bolt beyond the adjustment range (90°right and left of center position)
- 2 - Nut, M12x1.5, 95 Nm, self-locking, can be loosened and tightened no more than 5 times for adjustment, replace after each removal, tighten only in the position corresponding to the curb weight
- 3 - Eccentric washer, the hole has a ledge
- 4 - Eccentric bolt, after loosening, adjust the wheel alignment, do not turn the bolt beyond the adjustment range (90°right and left of center position)
- 5 - Eccentric washer, the hole has a ledge
- 6 - Nut, M12x1.5, 95 Nm, self-locking, can be loosened and tightened no more than 5 times for adjustment, replace after each removal, tighten only in the position corresponding to the curb weight. To tighten the nut, adjust the torque wrench -UL. G 1332- to provide a tightening torque of 80 Nm. Tighten to this torque only with socket wrench 18 mm -T10179-
- 7 - Subframe
- 8 - Bolt, M12x1.5x125, 90 Nm and tighten by 90°, replace after each removal
- 9 - Lower wishbone
- 10 - Nut, 90 Nm and tighten by 90°, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
- 11 - Bolt, M12x1.5x75, replace after each removal
- 12 - Threaded rivet, M6
- 13 - Spacer piston
- 14 - Shield protecting against stone strikes
- 15 - Hexagon bolt, M6x12, 8 Nm
- 16 - Nut, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
- 17 - Washer
- 18- Bolt, M14x1.5x115, 150 Nm and tighten by 90°, - replace after each removal, tighten only in the position corresponding to the curb weight
- 19 - Washer
- 20 - Upper transverse arm
- 21 - Washer
- 22 - Nut, self-locking, replace after each removal
- 23 - Wheel bearing housing
- 24 - Washer
- 25 - Bolt, M14x1.5x115, 150 Nm and tighten by 90°, replace after each removal, tighten only in the position corresponding to the curb weight
- 26 - Cross rod, fixes the position of the wheel from turning in the plane of the road
- 27 - Bolt, M12x1.5x125, 90 Nm and tighten by 90°, replace after each removal
- 28 - Bolt, M12x1.5x95, replace after each removal, tighten only in the position corresponding to the curb weight
- 29 - Nut, 90 Nm and tighten by 90°, self-locking, replace after each removal
Visitor comments