2. Disconnect the exhaust pipe from the manifold flange.
3. Disconnect the electrical wires from the starter motor and solenoid contacts.
Figure 10.5. Starter solenoid contacts (Section 8): 1 - From the battery; 2 - To the ignition coil; 3 - From the ignition switch, starter; 4 - Connection from field windings.
4. Loosen and remove the mounting bolts and remove the starter motor from the clutch housing.
5. Installation is carried out by performing the above steps in reverse order.
[The original information is posted on the resource: VWManual]
Visitor comments