Checking and adjusting the angle of the wiper arm
- 1 - wrench,
- 2 - wiper lever,
- 3 - tool VW 3358
The angle of the wiper arm should be checked when the glass cleaning efficiency is poor or when there is noise from the wipers.
Order of execution
1. Turn the wipers on and off until the wiper arms return to their original position. Remove the wiper blades.
2. Wiper arm (1) insert into tool HAZET 4851-1 or VW 3358 and secure with bolt, see fig. Checking and adjusting the angle of the wiper arm.
3. If adjustment is needed, being careful with the wrench (1) turn the tool VW 3358 until the pointer is on the scale at the desired value±2°.
Visitor comments