Remove the cap from the expansion tank.
Disconnect the radiator supply hose from the cylinder block and drain the coolant.
Check the reliability of the fastening of the cooling system hose clamps.
Fill the coolant to the MAX mark on the expansion tank.
Let the engine run to remove air pockets in the cooling system.
Check and, if necessary, top up the fluid level in the expansion tank.
Cooling system details:
1 — radiator;
2 - filler plug;
3 — electric fan switch sensor;
4 — fan;
5 - Electric motor;
6 — electric fan guide casing;
7 - gasket;
8 - distribution tube;
9 — thermostat housing;
10 — thermostat;
11, 13 — sealing rings;
12 — lid;
14 - water pump.
Visitor comments