The clutch pedal is easy to press or sinks
- Low fluid level in the clutch hydraulic system
- Damage to the release bearing or clutch release fork
- The diaphragm spring of the clutch pressure plate is damaged
Incomplete clutch disengagement (clutch leads)
- Too high fluid level in the hydraulic clutch system
- The driven clutch disc is seized on the splines of the primary shaft
- Warping of the clutch disc
- The pressure plate assembly is incorrectly assembled
- The clutch release mechanism is worn out or incorrectly assembled
Incomplete clutch engagement (the clutch is slipping)
- Clutch disc lining wear below acceptable limit
- Clutch disc linings contaminated with oil or lubricant
- The pressure plate is faulty or the diaphragm spring is weak
The article is posted on the portal vwmanual.ru
Jerks when engaging the clutch
- Clutch disc lining wear below acceptable limit
- Clutch disc linings contaminated with oil or lubricant
- The pressure plate or diaphragm spring is deformed
- The gearbox to engine mounts are loose
- The clutch disc hub or gearbox input shaft splines are worn out
Noise when pressing or releasing the clutch pedal
- The release bearing is worn out
- Clutch pedal bushings are worn out or lack lubrication.
- The pressure plate assembly is faulty
- Damage to the diaphragm spring of the pressure plate
- Damage to damping springs in the clutch disc

Visitor comments