Warning: The brake fluid used in the hydraulic clutch system is poisonous, so if it comes into contact with your skin, rinse the area immediately with plenty of water.
Warning: If liquid gets into eyes or inside the body, seek medical attention immediately.
Warning: Some fluids are highly flammable and can catch fire even if they come into contact with hot vehicle components. Also, the fluid used in the hydraulic clutch system dissolves paint and plastic, so if the fluid gets on the vehicle's paintwork, rinse it with plenty of water.
Warning: This liquid is also hygroscopic, i.e. it absorbs moisture from the air and therefore it is not recommended to use the liquid that has been stored for a long time in an open container.
Execution order
1. Check that the brake fluid level in the transparent reservoir is between the MIN and MAX marks.
2. If brake fluid needs to be topped up, first wipe the area around the filler cap and unscrew the cap from the brake fluid reservoir.
(View the original on this resource www.VWManual.ru)
3. Check the cleanliness of the reservoir and, if necessary, drain the brake fluid and clean the reservoir.
4. Add brake fluid up to the MAX mark on the reservoir. Use only the specified brake fluid, as mixing brake fluids is not allowed.
Visitor comments