Checking the parallelism of the movement of the hatch
- Arrow - installation mark.
- 1 - setting lever;
- 2 - backstage control;
- a - size
Examination
1. Remove the glass hatch cover.
2. Label on setting lever (1) must be located on both sides between the recesses in the cable guide (size a).
3. Office backstage (2) must be fixed in the guide and must not be moved by hand.
4. Otherwise, adjust the parallel movement mechanism.
Adjustment
1. Adjustment can only be made after removing the sunroof drive mechanism and the glass sunroof cover.
2. Remove the sunroof drive mechanism.
3. Move setting lever (1) forward so that the rear alignment mark is centered between the notches.
4. Install the sunroof drive mechanism in this position. The sunroof drive mechanism must be in its original position.
5. Install the glass hatch cover.
Visitor comments