1 - screw, 25 Nm
2 - oil filter base
3 - sealing ring
4 - radiator
5 - nut, 25 Nm
6 - oil filter
This type of engine uses a radiator inserted between the oil filter base and the filter. The filter is screwed to the radiator with a nut. After dismantling the oil filter and overlapping the hoses, the radiator can be dismantled. To do this, remove the nut from the underside.
The radiator in the base area is sealed with a ring. Tighten the nut to a torque of 25 Nm.
Visitor comments