Replacement
The anti-roll bar is attached to both front suspension arms with brackets through rubber bushings, and to the body side members with a second pair of brackets and bushings (figure M:14).
Raise the front of the vehicle (see chapter "Basic rules for carrying out work").
Loosen the nuts and remove the brackets securing the stabilizer to the suspension arms. Loosen the brackets securing the stabilizer to the body and remove the stabilizer from the car.
The stabilizer is installed in the reverse order. The bushings can be lubricated with soapy liquid or rubber grease before installation.
The article is posted on the portal [VWmanual]
Visitor comments