Fig. 8.49. Pedal parking brake lever:
1 - brake release lever; 2 - brake release rod; 3 - emphasis; 4 - foot parking brake; 5 - Hexagon bolt, 23 Nm; 6 - Hexagon bolt, 23 Nm; 7 - front cable; 8 - Hexagon bolt, 2 Nm; 9 - contact parking brake switch.
Fig. 6.50. Transmission module:
1 - transmission module; 2 - washer; 3 - buffer; 4 - cable stopper holder; 5 - Torx screw; 6 - cable stopper; 7 - compensating bracket; 8 - hex nut; 9 - Hexagon bolt, 23 Nm; 10 - clip; 11 - front cable; 12 - brake cables, rear.
Fig. 6.51. Rear brake cable:
1 - brake cable, rear; 2 - sealing ring; 3 - sealing ring; 4 - sliding sleeve; 5 - retaining ring.
Tighten the pedal parking brake lever by 2-3 teeth, while the wheels should spin without touching the brake pads.
Tighten the pedal parking brake lever by 5-7 teeth - the wheels should be locked. If the wheels still spin - it is necessary to adjust the parking brake.
Visitor comments