Bottom mount
1. Raise the front of the vehicle and support it securely on jack stands.
2. Remove the wheel.
3. Remove the clamp securing the flexible brake hose to the support bracket, disconnect the shoe and tie it to the side.
4 Disconnect the lower mount from the hub carrier as described in Section 7, points 7, 8 and 9.
(The information is presented on the website: vwmanual.ru)
5. Unscrew the fastener from the lower arm and remove it.
Top mount
6. Disconnect the upper mount from the hub carrier in the same manner as described for the lower mount. Unscrew and remove it from the upper suspension arm.
All fastenings
7. Installation is carried out by performing the above steps in reverse order, but ensure that the heads of the mounting bolts are located on the upper surface of the suspension arms.
8. Tighten all nuts and bolts to the required torque.
Visitor comments