Front spring (LT 40, 45) — removal and installation (VW Lt 28)

1. Slightly raise the front of the car and support it on jack stands.

2. Place a jack under the axle beam at the end where you intend to remove the spring.

3 Disconnect the stabilizer link from the spring plate.

4. Disconnect the lower shock absorber mount and compress it completely.

5. Unscrew and remove the bolts from the spring ears.

6. Remove the nuts from the U-bolts of the spring.

7. Remove the spring plate and spring.

8. Installation is carried out by performing the above steps in reverse order, but make sure that the spring eye, which is not completely closed, is located at the front. Use a jack placed under the axle to raise and lower the spring to align the bolt holes.

[The original can be viewed on the portal: vwmanual.ru]