Location of heater fan mounting screws
- 1 - electrical connector,
- 2 - fan casing
Removing
1. Remove the lower instrument panel trim on the passenger side.
2. Disconnect the electrical connector from the heater fan.
3. Unscrew the three screws and, moving downwards, remove the fan from the heater unit.
4. If necessary, remove the heater fan motor from the housing.
Installation
1. Install the fan in the heater block and fix it with screws.
2. Connect the electrical connector to the heater fan.
3. Install the lower instrument panel trim on the passenger side.
Visitor comments