Decrease the set speed
The set speed can be reduced by pressing the B key.
Each time you lightly press the B key, the speed decreases in steps. If you keep the B key pressed, the speed decreases by automatically moving the accelerator rod. When you release the key, the speed reached is entered into memory.
If you release the key at a speed below 30 km/h, the storage is cleared. Now you should set the desired speed again with key B after accelerating the car to a speed above 30 km/h.
Increase the set speed
The set speed can be increased without pressing the accelerator pedal by moving switch A to the RES position.
Each time the sliding switch is lightly pressed to the left, the speed increases in steps. If you slide the switch to the left and hold it in this position, the speed increases automatically by moving the accelerator rod. When you release the switch, the achieved speed is stored in memory.
Visitor comments