Heater block
- 1 - heater radiator;
- 2 - screw;
- 3 - air distribution box;
- 4 - switching valve actuator "fresh/recycled air";
- 5 - screw;
- 6 - heater fan;
- 7 - heater fan casing;
- 8 - screw;
- 9 - block of resistors with protection against overheating;
- 10 - screw;
- 11 - central damper lever;
- 12 - damper lever that controls the air temperature
Removing
1. Remove the glove box.
2. Disconnect the electrical connectors from the additional resistor (9).
3. Disconnect the electrical connector from the heater fan (6).
4. unscrew the screw (10) and remove the additional resistor.
5. Remove the heater fan downwards.
Installation
1. Install the heater fan.
2. Install an additional resistor and secure with a screw.
3. Connect electric sockets of the additional resistor and the fan of a heater.
4. Install the storage box.
Visitor comments