Removing
Pry off the plug 1 with a small screwdriver and remove it from the rear window 2.
Unscrew the nut 4 of the rear spoiler 3 (pic. 8.22).
Raise the rear spoiler 1 from the rear window 2 with the help of a second mechanic and disconnect the plug 4 from the auxiliary brake light 3 and the washer hose.
Rear spoiler 1 can now be removed by lifting it up (pic. 8.23).
Installation
When installing the rear spoiler, tighten nut 4 with a tightening torque of 6 Nm.
Installation is carried out in the reverse order.
Visitor comments