Removing and installing rear left power window switch -E52- or rear right power window switch -E54-
Switch off the ignition and all electrical consumers. Remove door trim. Release the four latches -arrows- and remove the switch from the installation frame.
Installation is carried out in the reverse order.
Components - rear door locks
The following components (depending on configuration) built into the lock of the rear left door:
- Rear left door limit switch -F10-
- Rear left locking element for central locking -F222-
- Central locking drive in rear left door, Lock -V214-
- Central locking motor in rear left door -V163-
The following components (depending on configuration) built into the rear right door lock:
- Rear right door limit switch -F11-
- Rear right locking element for central locking -F223-
- Central locking drive in rear right door, Lock -V215-
- Central locking motor in rear right door -V164-
Instruction: The above components cannot be replaced individually. If these components are faulty - in the locks of the rear doors - replace the lock of the corresponding door.
Visitor comments