The throttle cable is very sensitive to damage. When carrying out any work in the engine compartment of the car, make sure that it is not bent.
You may never need to replace the throttle cable with a new one, but it must be removed for some work. To do this, unscrew the support and unhook the end of the cable from the sector on the throttle body, which is fixed with a bracket. The tension of the cable is ensured by means of a bracket on the bracket, which does not need to be removed.
After installing the support and fixing the end of the cable, ask the assistant to press the pedal «gas» and check that the throttle sector does not move more than 1.0 mm.
Visitor comments